5
ENgLiSh
JABRA BT8040 BLUETOOTH STEREO HEADSET
Pair it with your phone
Before you use your Jabra BT8040, you will need to pair it with
your mobile phone.
1. Your headset will automatically go into pairing mode when you
turn it on the rst time.
2. Set your Bluetooth phone to ‘discover’ the Jabra BT8040.
Follow your phone’s instructions. This usually involves going to a
‘setup’, ‘connect’, or ‘Bluetooth’ menu on your phone and selecting
the option to ‘discover’ or ‘add’ a Bluetooth device.*
BT8040
JABRA BT8040
JABRA BT8040
3. Your phone will nd the Jabra BT8040.
Your phone then asks you if you want to pair with it. Accept
this by pressing ‘Yes’ or ‘OK’ on the phone and conrm with the
passkey or PIN = 0000 (4 zeros). Your phone will conrm when the
pairing is complete.
In the case of an unsuccessful pairing, repeat steps 1 to 3.
Manual pairing
You can manually put your Jabra BT8040 into pairing mode, if you
want to pair with a second phone or Bluetooth device:
1. Ensure that the headset is o.
2. Press and hold the answer/end button for approx. 5 sec. until
the light turns solid Blue.
3. Set your Bluetooth phone to discover your headset as
described above.
WEAR iT hoW yoU LikE iT
The Jabra BT8040 is ready to be worn. The ear gels can be used
for both left and right wearing. The BT8040 comes with a medium
sized ear-gel, but it can be replaced by a small or large one. You
can also twist the ear gel slightly to optimize the t and comfort.
