]]
_i :---£_---'_- D._" _'
NOTE: If you have a cassette tape that has a!ready been partiallyrecorded on and you want to record the 1
remaining blank section, see "QUICK EDIT"on page 27.
1 In record/pause (stand-by) mode, tap "REW/REVIEW", and the last few seconds of the recorded scene is
played back inthe reverse direction and then played back in the forward direction.
2. When the tape reaches the end of the scene you have just recorded, the camcorder returns to the
record/pause (stand-by) mode.
Recording starts again when "REC/PAUSE" is pressed again.
NOTE: Whe n !tREW!REVIEWI' is Pressed once, the camcorder enters the instant review mode, arid when it is ]
held depressed, the camcorder enters the quick edit mode. J
You can view recorded pictures with the electronic viewfinder.
NOTE: If you connect the camcorde r to your TV, you can seethe pictureplayed back on your TV, Refer to 1
VIEWING THE PICTURE PLAYED BACK ON YOUR TV on page 30. J
1 Press and hold the small button on "CAM/OFF/VIDEO", and then slide it to the "VIDEO" position.
2 Press "REW/REVIEW" to the positionwhere you want to start playback
3 Press "PLAY" and play back the tape
I NOTE: Adjust TRACKING if necessary. See "Tracking adjustment" on page 30, 1
4 Press "STOP/EJECT" when you have finished.
