Query :WLISt:LINE?
The LINE query returns the line number for the state currently in the data
listing roll box at center screen.
Returned Format [:WLISt:LINE] <line_num_mid_screen><NL>
Example OUTPUT XXX;":WLIST:LINE?"
MINus
Command :WLISt:MINus <module_spec>,<waveform>,<waveform>
The MINus command inserts time-correlated A−B (A minus B) oscilloscope
waveforms on the screen. The first parameter is the module specifier where
the oscilloscope module resides, where 1 through 10 refers to slots A through
J. The next two parameters specify which waveforms will be subtracted from
each other.
MINus only inserts oscilloscope waveforms. It cannot be used with analyzer
waveforms.
<module_spec> {1|2|3|4|5|6|7|8|9|10}(slot where master card is located)
<waveform>
string containing <acquisition_spec>{1|2}
<acquisition_
spec>
{A|B|C|D|E|F|G|H|I|J} (slot where acquisition card is located)
Example OUTPUT XXX; ":WLIST:MINUS 1,’A1’,’A2’"
WLISt Subsystem
MINus
4–8
