EDGE
Command :MACHine{1|2}:TTRigger:EDGE<N> <label_name>,
<edge_spec>
The EDGE command allows you to define edge specifications for a given
label. Edge specifications can be R (rising), F (falling), E (either), or "."
(don’t care). Edges are sent in the same string with the rightmost string
character specifying what the rightmost bit will be.
The <edge_spec> string length must match the exact number of bits assigned
to the specified label. If the string length does not match the number of bits, the
"Parameter string invalid" message is displayed.
<N> {1|2}
<label_name> string of up to 6 alphanumeric characters
<edge_spec> string consisting of {R|F|E|.}[to total number of bits]
Example For 8 bits assigned:
OUTPUT XXX;":MACHINE1:TTRIGGER:EDGE1 ’DATA’, ’....F..E’"
For 16 bits assigned:
OUTPUT XXX;":MACHINE1:TTRIGGER:EDGE1 ’DATA’,
’....EEE.....F..R’"
TTRigger (TTRace) Subsystem
EDGE
12–13
