The input trays listed in the Form to Tray Assignment setting are also listed as media sources on
the Paper/Quality tab.
Configuring the trays
1. Select the appropriate tray in the Form to Tray Assignment list.
2. Use the drop-down menu to select the media size (form) that is loaded in that tray.
3. Repeat steps 1 and 2 for the remaining trays.
4. Click OK to enable your settings, or, if necessary, click the Cancel button to reconfigure all the
trays, and remove the size and type constraints that you have specified on the Paper/Quality tab.
Font Substitution Table
Clicking this option opens the Font Substitution Table and makes available the options for changing
the TrueType-to-PostScript font mapping. The following figure shows the Device Settings tab with
the Font Substitution Table open.
Figure 5-24 Font Substitution Table – PS Emulation Unidriver
External Fonts (HP PCL 6 Unidriver and
HP PCL 6 Black and White Driver only)
Use the External Fonts option to install and remove external fonts for the MFP. External fonts can be
soft fonts or DIMM fonts.
250 Chapter 5 HP PCL 6 and PS emulation unidrivers for Microsoft Windows ENWW
HP PCL 6 and PS
emulation unidrivers for
Microsoft Windows
