Follow these steps to manually print on both sides.
1. Select the Print on Both Sides (Manually) check box.
2. Click OK. The even-number pages of the document print.
3. When the Print on Both Sides Instructions dialog box appears on the computer screen, follow
the directions in the dialog box to insert the stack of media (on which the even-numbered pages
have been printed). The MFP control panel shows the Load Tray message for the tray from which
you printed the even-numbered pages.
Figure 5-17 Print on Both Sides Instructions
When you have completed the steps that appear in the dialog box, the second half of the print job
prints on the back side of the stack of media. The driver does not require the program to specifically
support odd- and even-page printing, because the driver coordinates this function.
Flip Pages Up option
Select the Flip Pages Up check box, which is enabled only when Print on Both Sides is selected, to
specify the duplex-binding option. By default, the Flip Pages Up check box is not selected. The following
table shows the results of selecting this box, depending on the paper orientation that you select on
the Finishing tab.
Table 5-3 Page orientation
Orientation (Finishing tab) Flip Pages Up selected Flip Pages Up not selected
Portrait Short-edge binding Long-edge binding
Landscape Long-edge binding Short-edge binding
236 Chapter 5 HP PCL 6 and PS emulation unidrivers for Microsoft Windows ENWW
HP PCL 6 and PS
emulation unidrivers for
Microsoft Windows
