This section contains the following topics:
•
Load full-size paper
•
Load 10 x 15 cm (4 x 6 inch) photo paper
•
Load postcards, Hagaki, or index cards
•
Load envelopes
•
Load other types of paper
Load full-size paper
You can load many types of letter, A4, or legal paper into the main input tray of the HP All-
in-One.
To load full-size paper
1. Pull out the main input tray, and then slide the paper-width and paper-length guides
to their outermost positions.
2. Tap a stack of paper on a flat surface to align the edges, and then check the paper
for the following:
• Make sure it is free of rips, dust, wrinkles, and curled or bent edges.
• Make sure all the paper in the stack is the same size and type.
3. Insert the stack of paper into the main input tray with the short edge forward and the
print side down. Slide the stack of paper forward until it stops.
TIP: If you are using letterhead, insert the top of the page first with the print side
down. For more help on loading full-size paper and letterhead, refer to the diagram
engraved in the base of the input tray.
Load paper 37
Load originals and load paper
