IP Routing Features
Overview of IP Routing
You can set or display the arp-age value using the menu interface (Menu >
Switch Configuration > IP Config).
ProCurve 12-June-2007 14:45:31
===========================- TELNET - MANAGER MODE ======================
Switch Configuration - Internet (IP) Service
IP Routing : Disabled
Default Gateway : 15.255.120.1
Default TTL : 64
Arp Age : 1000
IP Config [Manual] : Manual
IP Address : 15.255.111.11
Subnet Mask : 255.255.248.0
Actions-> Cancel Edit Save Help
Figure 5-4. Example of the Menu Interface Displaying the ARP Age Value
Table 5-2.
IP Interface Parameters for Routing Switches
Table 5-2 lists the interface-level IP parameters for routing switches.
IP Interface Parameters – Routing Switches
Parameter Description Default See page
IP address A Layer 3 network interface address; separate IP
addresses on individual VLAN interfaces.
None configured *
Metric A numeric cost the router adds to RIP routes learned
on the interface. This parameter applies only to RIP
routes.
1 (one) 5-32
ICMP Router
Discovery
Protocol (IRDP)
Locally overrides the global IRDP settings. See table 5-
1 on page 5-10 for global IRDP information.
Disabled 5-125
IP helper address The IP address of a UDP application server (such as a
BootP or DHCP server) or a directed broadcast
address. IP helper addresses allow the routing switch
to forward requests for certain UDP applications from
a client on one subnet to a server on another subnet.
None configured 5-131
*
Refer to the chapter titled “Configuring IP Addressing” in the Management and Configuration Guide for your switch.
5-14
