Transmitting Data
131
Back
Next
Index
Accessing Serial Port Options
1 Highlight the Menu icon and choose Main
Menu from the dropdown menu.
2 Choose Serial Port from the Main menu.
3 Select one of the following from the Serial Port
menu:
✔ Braud Rate
✔ Serial In
✔ Serial Out
Setting the Baud Rate
Before transmitting data between the DCS 645
and a connected device, you must set the correct
baud rate required by the device. Choose from
300, 600, 1200, 2400, 4800, 9600, 19200,
38400, 57600, and 115200.
1 Select Baud Rate from the Serial Port menu.
2 Select the appropriate baud rate for the
connected device from the Baud Rate menu.
The setting is retained until you change it, or
modem is selected as the Serial In or Serial
Out mode. When Modem is selected, baud
rate is automatically set to 19200.
