6 - 8 Quick Check® SV Series User’s Guide
~HQ#
Transmission Mode
Values for # are:
~HT
Display the verifier parameters
The format of the reply is, when ~De0 is set: (See ~De# (page 6-6) command for
an alternate reply choice).
1. ~H
2. hexadecimal value ‘4’ - identifies the beginning of the data packet
response.
3. A list of text strings like the one shown in the example. Each string is
terminated by a two character sequence: ‘\r’ (the carriage return character),
‘\n’ (the line feed character).
4. hexadecimal value ‘5’ - identifies the end of the data packet response
5. T
Example: (The numbers of parameters reported varies with the com-
mands included in the firmware revision)
~H
{hex 4}
[~HS###]SOS= 048
[~HP###]Beam Shift= 000 000
[c]HIGHcal= 085
[c]LOWcal= 002
[~Sh##]= 000
1 (moving bar codes mode) Use for normal operation
2 (moving bar codes mode, fast code exit)
3 (reserved)
4 (stationary bar codes mode)
0 Standard mode
1 - 9 reserved
