COPYRIGHT © 2006 MERIT ENTERTAINMENT
DIP# Function Notes
8 Motherboard
configuration &
checksum test
•
Configures the CMOS settings on the motherboard to
Merit specifications and checks the files on the hard
drive.
checksum test should be
erformed when the
ame is
locking up or rebooting. If the test fails, contact your
authorized dealer.
6 Hardware
configuration
•
Identifies system hardware and configures the
motherboard.
hardware confi
uration occasionall
needs to be
erformed after a kit is installed and the touchscreen is not
responding to touch or the calibration is off.
5 & 7 Memory clear
for GTnet
•
Clears the log in name, password, and all settings.
•
Clears high scores and resets the software options.
memor
clear should be
erformed when a
ame is not
able to connect to the Internet and there is some question
about the accuracy of the connectivity information. After
performing a memory clear, Internet setup information must
be re-entered, and an
Update From Server
should be
performed.
NOTE: TournaTime games must perform an Update
From Server BEFORE performing a memory clear.
4 & 7 Complete
memory clear
•
Clears ALL memory on hard drive including the
TournaTime
la
er database, TournaTime settin
s, hi
h
scores, o
tions, etc. It resets the
ame to the factor
defaults. It also marks bad sectors on hard drive.
A complete memory clear should only be performed when
the
ame is lockin
u
or resettin
and it has
assed the
checksum test. After
erformin
a memor
clear, the
player database should be reloaded, Internet setup
information must be re-entered, and an
Update From
Server
should be performed.
NOTE: TournaTime
ames must
erform an U
date
From Server BEFORE
erformin
a com
lete memor
clear.
3 Watchdog
Timer
•
When the watchdog timer is enabled, it will reboot the
machine within 2 minutes of a failure, allowing the game
to automatically reset itself if a problem arises.
DIP SWITCH SETTINGS
The following table provides information on the functionality of the hard DIP switches in
Megatouch Gametime games. Make sure to read the information in the Notes column to
determine what is affected when performing these functions. After performing any DIP
switch function, make sure to follow the instructions on the screen. The DIP switch
functionality is built into the software. Turn off the game. Press and hold the SETUP button
while turning on the game. The diagnostic page will be displayed. Touch the specific DIP
switch to activate it. Touch X to exit.
19 MEGATOUCH GAMETIME OWNER’S MANUAL PM0503-08
