vi SPARC Enterprise T5140 and T5240 Servers Installation Guide • February 2008
Connecting the Server Cables for Both Servers 31
▼ To Connect the Service Processor Serial Management Port 31
▼ To Connect the Service Processor Network Management Port 32
▼ To Connect the Ethernet Network Cables 33
▼ To Connect the AC Power Cable to the Server 34
Managing Cables With the CMA 34
▼ Securing the Server Cables in the CMA 35
Dismounting the Servers 35
3. Powering On the System 37
Powering On the System for the First Time 37
ILOM System Console 37
ILOM Service Processor 38
▼ To Power On the System for the First Time 38
Enabling the Service Processor Network Management Port 44
Logging Into the Service Processor 45
▼ To Log Into the Service Processor Using the Serial Management Port 45
▼ To Configure the Service Processor Network Management Port 47
▼ To Log Into the Service Processor Using the Network Management Port
50
Using the Service Processor for Common Operations 50
▼ To Power On the System 51
▼ To Connect to the System Console 53
▼ To Perform a Normal System Initialization 53
Devices in the OpenBoot Device Tree 55
Booting the Solaris Operating System 56
▼ To Boot the Solaris Operating System 56
▼ To Avoid Booting the Solaris Operating System at Start Up 57
▼ To Reset the System 57
