FENIX IMVICO
TK14 OPERATION MANUAL
39/65
GS T
n
[Name] Set print position to the beginning of print line
[Format] ASCII GS T
n
Hex 1D 54
n
Decimal 27 84
n
[Range]
n
= <00>H or
n
= <01>H
[Description] Sets the print position to the beginning of print line.
•
n
specifies the data processing in the print buffer.
n
Printing position
<00>H Sets the print position to the beginning of print line after deleting all
data in the print buffer.
<01>H Sets the print position to the beginning of print line after printing all data
in the print buffer.
GS V m
[Name] Feeds paper to the passive cutter line.
[Format] ASCII GS V
m
Hex 1D 56
m
Decimal 27 86
m
[Range]
m
= <01>H
[Notes]
•
There are 26 mm of distance between the thermal head line and the passive
cutter line. This command arranges the ticket to be cut, feeding paper
automatically.
•
This command is effective only when processed at the beginning of a line.
Afterwards the ticket is cutting by the user, the printer feeds the paper back to the
printing position.
•
Sending this command, user informs to TK14 that actual ticket is completely
finished; so TK14 can make internal controls to right performance.
GS f
n
[Name] Select font for Human Readable Interpretation (HRI) characters
[Format] ASCII GS f
n
Hex 1D 66
n
Decimal 27 102
n
[Range]
n
= <00>H or <01>H
[Description] Selects a font for the HRI characters used when printing a bar code.
n
selects a font from the following table:
n
Font
<00>H Font A (12x24)
<01>H Font B (8x16)
[Notes]
•
HRI indicates Human Readable Interpretation
•
HRI characters are printed at the position specified by
GS H
.
•
HRI characters are always printed at X-Scale = 1 and Y-Scale = 1
[Default]
n
= <01>H
[Reference]
GS H, GS k
