FENIX IMVICO
TK14 OPERATION MANUAL
33/65
ESC t
n
[Name] Select character code table
[Formato] ASCII ESC t
n
Hex 1B 74
n
Decimal 27 116
n
[Range]
n
=<00>H ,
n =
<11>H
[Description] Selects page
n
from the character code table.
n
Page
0 PC437 (U.S.A., standard Europe)
17 PC866 (Cyrillic)
[Default]
n
= 0
[Reference]
APPENDIX F
ESC SP
n
[Name] Set right-side character spacing
[Format] ASCII ESC SP
n
Hex 1B 20
n
Decimal 27 32
n
[Range] <00>H
≤
n
≤
<FF>H
[Description] Sets the character spacing for the right side of the character to [
n x
0.125 mm
(
n x
0.0049”)].
[Notes]
•
The right side character spacing for double-width mode is twice the normal
value. When characters are enlarged, the right-side character spacing is
n
times
normal value.
•
This command is effective only when sent at the beginning of a line.
[Default]
n
= <04>H
[Reference]
APPENDIX A
ESC !
n
[Name] Select print mode(s)
[Format] ASCII ESC !
n
Hex 1B 21
n
Decimal 27 33
n
[Range] <00>H
≤
n
≤
<FF>H
[Description] Selects print mode(s) using
n
as follows:
Bit OFF/ON Hex Function
OFF 00
Character font A (12 x
24).
0
ON 01 Character font B (8 x 16).
1 -- -- Undefined.
2 -- -- Undefined.
OFF 00 Emphasized mode not selected.3
ON 08 Emphasized mode selected.
OFF 00 Double-height mode not selected.4
ON 10 Double-height mode selected.
OFF 00 Double-width mode not selected.5
ON 20 Double-width mode selected.
6 -- -- Undefined.
7 -- -- Undefined.
[Notes]
•
When both double-height and double-width modes are selected, quadruple-size characters
are printed.
•
When some characters in a line are double or more height, all the characters in the line are
aligned at the baseline.
•
ESC M
can also select character font type. However, the setting of the last
received command is effective.
•
GS !
can also select character size. However, the setting of the last received
command is effective.
