A SERVICE OF

logo

2
Control Panel Function
2-23
Cardinal U/G
Rev. C
A5 size CHAPTER2.FM
11/6/98 Pass 0
R
Proof Sign-off:
Kimura _______
Nishi _______
Hoadley _______
Standby
There are two levels of standby mode. The printer saves energy
by reducing power to the fixing heater if the printer receives no
data for 30 minutes (level1) or 60 minutes (level2). In this mode,
the printer begins to warm up as soon as you start to send print
data; it is ready to print in about 60 seconds (level1) or 300 seconds
(level2).
Lang
Specifies the language displayed on the control panel and printed
the status sheet.
Printer Name
Displays the printer name instead of Ready when the printer is
standing by.
Y Toner / M Toner / C Toner / K Toner
Displays the amount of toner left in the imaging cartridge.
E****F (100-76%)
E*** F (75-51%)
E** F (50-26%)
E* F (25-1%)
E F(0%)
Page Count
Displays the total number of sheets printed by this printer.
SelecType Init
Erases all the SelecType settings that you have made, and resets
them all to the factory default settings.