8
Troubleshooting
8-31
Cardinal U/G
Rev. C
A5 size CHAPTER8.FM
11/6/98 Pass 0
R
Proof Sign-off:
Kimura _______
Nishi _______
Hoadley _______
Paper Set XXX YYYY
XXX
: The selected paper source is indicated.
YYYY
: The selected paper size is indicated.
The paper loaded in the specified paper source (
XXX
) does not
match the required paper size (
YYYY
). Replace the loaded
paper with the correct size and press
Continue.
If you press Continue without replacing the paper, the printer
will print on the loaded paper even though it does not match
the required size.
Print Overrun
The required time to process the print data exceeds the print
engine speed because the current page is too complex. Press
the
Continue
button to resume printing. If this message
appears again, turn on
Page Protect
in the Config Menu of
the SelecType setting.
If you continue to receive this message when printing a
particular page, try simplifying the page by limiting the
number of graphics or reducing the number and size of fonts.
You can also add more memory to the printer as described in
Chapter 6 “Using Options”.
Mem Overflow
The printer has insufficient memory available for the current
task. To correct the error, press the
Continue
button on the
control panel. If the message remains, reset the printer as
described on page 8-35. You can also clear this message by
turning the printer off, waiting 10 seconds, and then turning
it back on.
