99
Controls in detail
Opening and closing
3
̈ Resetting the sliding door: Close
the sliding door completely once by
pressing and holding down the
switch on the center console or in
the doorway.
Then
̈ Open and close the sliding door com-
pletely once by pressing and relea-
sing one of the switches.
This restores normal operation of the
sliding door.
You can fix the rear doors in place at an
angle of approximately 90° or 270°.
Rear doors
Warning G
When you open the rear door:
ț there must be sufficient clearance
ț make sure that nobody can become
trapped
Warning G
The rear lamps are concealed by more
than 50% when you open the rear doors
through 90° or more.
The vehicle is then not sufficiently safe-
guarded at the rear and may only be seen
by other road users when they are close
to the vehicle. This could lead to an acci-
dent.
Make sure, therefore, that the vehicle is
safeguarded at the rear in accordance
with national legal requirements, e.g. with
a warning triangle.
nf_BA.book Page 99 Friday, January 25, 2008 3:53 PM
