• Usetheunitonlyindaylightorgoodartificiallight. • Useonlyreplacementpartsoraccessoriesrecommendedfor
Avoidaccidentalstarting.Beinthestartingposition
wheneverpullingthestarterrope.Theoperatorandunit
mustbeinastablepositionwhilestarting.Referto
Starting/Stopping Instructions.
Use the right tool. Only use this tool for its intended purpose.
Do not overreach. Always keep proper footing and balance.
Always hold the unit with both hands when operating. Keep
a firm grip on both handles or grips.
Keep hands, face, and feet at a distance from all moving parts.
Do not touch or try to stop the cutting attachment when it rotates.
Do not touch the engine, gear housing or muffler. These
parts get extremely hot from operation, even after the unit is
turned off.
Do not operate the engine faster than the speed needed to
cut, trim or edge. Do not run the engine at high speed when
not cutting.
Always stop the engine when cutting is delayed or when
walking from one cutting location to another.
Ifyou strike or become entangled with a foreign object, stop
the engine immediately and check for damage. Do not
operate before repairing damage. Do not operate the unit
with loose or damaged parts.
Stop the unit, switch the engine to off, and disconnect the
spark plug for maintenance or repair.
this tool that are distributed by Sears or a Craftsman outlet.
Use of any replacement parts or accessories purchased
elsewhere may be hazardous, and will also void your warranty.
Keep unit clean of vegetation and other materials. They may
become lodged between the cutting attachment and shield.
To reduce fire hazard, replace a faulty muffler and spark
arrestor. Keep the engine and muffler free from grass, leaves,
excessive grease or carbon build up.
OTHER SAFETY WARNINGS
Never store the unit with fuel in the tank, inside a building
where fumes may reach an open flame (pilot lights, etc.) or
sparks (switches, electrical motors, etc.).
Allow the engine to cool before storing or transporting. Be
sure to secure the unit while transporting.
Store the unit in a dry area, locked up or up high to prevent
unauthorized use or damage, out of the reach of children.
Never douse or squirt the unit with water or any other liquid.
Keep handles dry, clean and free from debris. Clean after
each use, see Cleaning and Storage Instructions.
Keep these instructions. Refer to them often and use them to
instruct other users. If you loan someone this unit, also loan
them these instructions.
SAVE THESE INSTRUCTIONS
SAFETY AND INTERNATIONAL SYMBOLS
This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the
operator's manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL MEANING
A' SAFE_ ALER T SYMBO L
,_,_ Indicates danger, warning or caution. May
be used in conjunctio n with othe r symbels or
pictographs,
WARNING ! READ OPERATOR S MANUAL
|11 ! !111 Readtheoperators manual(s)andfollowall
I_JIF warnings and safety instructions. Failure to do
Socan result in serious injury to the operator
and!or bystanders,
,, WEAR EYE AND HEARING PROTECTION
I WARNING:Thrown objects and loud noise
can cause severe eye injury and hearing loss.
Wear eye protection meeting ANSI Z87J
standards and ear protection when operating
this unit. Use a full face shield when needed.
UNLADED FUEL
,_ Always use c!ean, 
