36
NOTE: If you do not have enough available memory to install an additional image, delete an old
image. “Delete an Image with the CLI” on page 38.
3. Specify the new boot image to be used.
a. Find the name of your new system image by entering the dir image command. Copy the name
of the new image.
b. Enter boot-config primary-image-source, then paste the copied image file name.
Example
4. Reboot the chassis. Note: You can also use the card shutdown and card no shutdown commands
or the Element Manager GUI to reboot an individual card if you do not need to update the entire
chassis.
Example
5. Save the system configuration. Click Yes when prompted.
6. Use the show card-inventory command to view the new primary image for all cards.
Upgrade the Software Image with the GUI
1. Launch the Element Manager GUI.
2. Select Maintenance > File Management. The File Management window appears.
Topspin-360# configure
Topspin-360(config)# boot-config primary-image-source TopspinOS-2.1.0/build497
Topspin-360(config)# exit
Topspin-360# reload
