A-6
Cisco ONS 15310-MA SDH Reference Manual, Release 9.1 and Release 9.2
78-19417-01
Appendix A Specifications
Card Specifications
–
Minimum transmitter output power: Depends on the SFP used
(see the “A.3 SFP Specifications” section on page A-9)
–
Center wavelength: See wavelength plan
–
Center wavelength accuracy: 1 nm to 4 nm, depending on the SFP used
–
Transmitter: DFB laser
• Optical ports: Receiver
–
Maximum receiver level: Depends on the SFP used
(see the “A.3 SFP Specifications” section on page A-9)
–
Minimum receiver level: Depends on the SFP used
(see the “A.3 SFP Specifications” section on page A-9)
–
Receiver: PIN PD
–
Receiver input wavelength range: Depends on the SFP used
• Environmental
–
Operating temperature:
C-Temp: +23 to +131 degrees Fahrenheit (–5 to +55 degrees Celsius)
I-Temp: –40 to +149 degrees Fahrenheit (–40 to +65 degrees Celsius)
–
Operating humidity: 5 to 85 percent, noncondensing. Operation is guaranteed for 96 hours at 95
percent relative humidity.
–
Power consumption: 9.28 W, 0.19 A, 31.68 BTU/hr
• Dimensions
–
Height: 6.94 in. (167.28 mm)
–
Width: 1.45 in. (36.83 mm)
–
Depth: 8.35 in. (212.09 mm)
–
Weight not including clam shell: 1.6 lb (0.73 kg)
LAN Port
• Supports a 10/100-Mbps Ethernet interface for Cisco Transport Controller/Transaction Language
One (CTC/TL1) provisioning.
CRAFT Port
• An EIA/TIA-232 craft interface is provided and is used for TL1 provisioning.
• The craft interface is set to 9600 baud, no parity, and 1 stop bit by default.
A.2.2 Nonvolatile Memory
The ONS 15310-MA SDH nonvolatile memory has a 128 MB Compact Flash card
A.2.3 CE-100T-8 and ML-100T-8 Cards
The CE-100T-8 and ML-100T-8 cards have the following specifications:
• Environmental
–
Operating temperature
