R-95
QT-6600 Reference Manual
3-3-5. Stock maintenance
This command is used to update PLU, scanning PLU, department stock quantities brought
by purchasing or inventory processing.
1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.
3. Select “5. Stock Maintenance” and press the <YES> key.
4. Select “PLU/ Scan PLU/ Department” and press the <YES>
key.
5. Select the appropriate PLU and press the <YES> key.
6. Enter adjustment (adding) stock value and press the <YES>
key. If you want to decrease stock value, press the <RF> key
before entering the stock value.
The next PLU appears on the screen.
7. Press the <ESC> key to terminate this sequence.
8. Press the <ESC> key to issue receipt.
MGR
C
01 10-10-01 12:34 000000
Manager Mode
1.System Connection Check
2.Remote On
3.Remote Off
4.Busy Reset
5.Stock Maintenance
6.Drawer for Clerk
7.CHK#(CLK Interrupt)
8.Order ID Change
↓
0.00
No. Descriptor Stock
1 PLU0001 0.000
0.000
0.00
No. Descriptor Stock
1 PLU0001 +100.000
100.000
2 PLU0002 0.000
0.000
PLU0001 +100.000
Stock Maintenance
PLU
1.PLU0001
2.PLU0002
3.PLU0003
4.PLU0004
5.PLU0005
6.PLU0006
7.PLU0007
8.PLU0008
↓
0.00
Entered stock quantity
Total stock quantity
Stock Maintenance
No. Descriptor Stock
----------------------------------------
1 PLU0001 +100.000
100.000
2 PLU0002 0.000
0.000
RECEIPT
Manager Mode
Stock Maintenance
1.PLU Stock
2.Scan PLU
3.Department
0.00
