R-124
Manager Operation
Satellite Master
Terminal
files
Terminal
files
Consolidation
files
Consolidation
work
1, 6
2
3
2
5
3-6-2-2. Z consolidation processing (except scanning PLU)
Z consolidation processing is performed as the figure shown below.
1 A Z consolidation command is started up from the master terminal.
The master first locks an objected terminal. (Z lock)
2 Data of the objected terminal files are sent to the master terminal, and are copied to the
consolidation work file.
3 The data in the consolidation work file is added to the consolidation file.
4 After the processing of the master terminal completes, the same processes described in
item 1 to 3 are executed for all other terminals.
5 The data accumulated in the consolidation file are reported on the master's printer.
6 After the above collection processing completes for all objected terminals, the files of
all objected terminals are cleared, and then satellite's Z lock statuses are released.
3-6-2-3. Z consolidation processing (scanning PLU)
Z consolidation processing is performed as the figure shown below.
Satellite Master
Terminal
files
Terminal
files
1, 5
2, 3
4
1 A Z consolidation command is started up from the master terminal.
The master first locks an objected terminal. (Z lock)
2 Data of the objected terminal files are sent to the master terminal, and are added to the
master terminal file.
3 Step 2 are executed for all other teminals.
4 The data accumulated in the master terminal file are reported on the master's printer.
6 After the above processing completes for all objected terminals, the files of all objected
terminals are cleared, and then satellite's Z lock statuses are released.
NOTE:
• Even if an error is occurred, or if the processing is terminated, the data to be collected
remains as they are, and Z lock statuses are automatically released. Therefore, retrying
the same operation can be performed.
