Infotainment System 23
3. When the screen displays “Insert
Disc (number)”, insert the disc
partway into the slot, label side
up. The system pulls it in and
starts playing. The system
displays the type of disc
inserted, DVD - Video,
B Audio
for CD/DTS, MP3 for MP3 CDs,
or DVD - Audio.
To load multiple discs:
1. Press and hold
M.
2. When the screen displays “Insert
Disc (number)”, load the disc
partway into the slot, label side
up. The system pulls it in.
3. Once a CD is loaded, the
system displays “Insert Disc
(number)” again. Load the next
disc. Repeat this procedure for
each disc. The player takes up
to six disc(s), do not try to load
more than six. The system will
not display the disc types when
loading all, until the discs have
been read by the system.
Once all discs have been
inserted, the system starts
playing the last loaded disc.
If no CD or DVD is loaded in the
CD/DVD changer and SRCE is
pressed, a “No disc loaded”
error message displays.
Select the Cancel screen button,
when available, to stop the
loading process and to start
playing the last loaded disc.
Z (Eject): To eject a disc:
1. Press
Z.
2. Select the slot number,
1 through 6, to eject the disc.
3. The system displays “Ejecting
Disc” and then ejects the disc.
If a selection is not made, the
system ejects the disc from the
current slot. If the disc is not
removed from the slot, the
system pulls it back in after
10 seconds and starts playing it.
To eject all discs at once, press and
hold
Z. The system displays the
disc number being ejected.
Playing an Audio CD
The numbered screen buttons,
1 through 6, represent the order of
the discs loaded in the changer.
If there are only two discs loaded,
only screen buttons 1 and 2 are
available.
The play, reverse, fast forward, and
pause screen buttons only appear
when the CD/MP3 controls button is
selected on in the Audio screen.
r (Play): Select or press one of the
available screen buttons,
1 through 6, to begin playing that
disc. There is a 12 to 15 second
delay while the CD is read, before it
begins to play.
r (Reverse): Press and hold to
reverse through the current track.
If reverse past the current track, the
system goes to the previous track
on the disc.
