16 Infotainment System
5. Seek, scan, or tune to the
desired station.
6. Press and hold one of the six
preset screen buttons for more
than two seconds or until a beep
is heard.
7. Press
e (Audio Adjust) to adjust
the tone, Digital Signal
Processing (DSP), fade, and
balance. The screen times out
and the changes are stored to
the preset station.
8. Repeat the steps for each preset
and list.
Audio Adjust
e (Audio Adjust): Press to access
the AUDIO ADJUST menu and to
adjust the tone, Digital Signal
Processing (DSP), fade, and
balance for all sources. The system
automatically stores audio
adjustment settings as changes are
made to a preset station.
Audio Pilot (Noise Compensation
Technology): The vehicle has
Bose AudioPilot
®
noise
compensation technology.
To use this feature, press the Audio
Pilot screen button. To turn it off,
press this button again. The button
highlights when this feature is on.
When on, AudioPilot
®
continuously
adjusts the audio system
equalization, to compensate for
background noise, so that the music
always sounds the same at the set
volume level.
This feature is most effective at
lower volume settings where
background noise can affect how
well you hear the music being
played through the vehicle's audio
system. At higher volume settings,
where the music is much louder
then the background noise, there
may be little or no adjustments by
AudioPilot
®
. For more information
on AudioPilot
®
, visit www.bose.com/
audiopilot.
Multi-channel: When available,
press this screen button to play the
DVD Audio source in surround
mode. Press this screen button
again to have the audio play in
2-channel mode. The system plays
Dolby and DTS tracks in surround
sound. This feature depends on the
media in the DVD changer.
Setting the Tone
P (Treble): Press plus (+) or
minus (−) located next to this
symbol to increase or decrease the
treble. Press the center position to
adjust the setting to the center.
