SOURCE SELECTION
To select an input (source) press the button on the left side of the
remote control whose number corresponds to the input you wish to
listen to, and it will show in the display. You will now be listening to
your desired input.
VOLUME, BALANCE and MUTE
To increase the volume, press the button on the right side marked
with an up arrow. To reduce, press the button marked with a down
arrow. Holding either button down will cause the volume to change
continuously until released.
To change the balance to the left, press the button at the top marked
with a left arrow until the display shows “BALANCE CENTERED” and
continue holding until the display shows the desired balance change.
Similarly, you may change the balance to the right by holding the button
marked with a right arrow.
To temporarily mute the audio, press MUTE. To return to normal
audio level, again press MUTE.
REMOTE
CONTROL
3-2
