CONNECTING THE AUXILIARY OUTPUTS
The auxiliary output level of the 865 Integrated Amplifier can be set
to either a fixed mode suitable for use with a recording device or music
distribution system; or a variable mode for use with a subwoofer or
secondary amplifier. Instructions to program the outputs can be found
on page 4-6 of this manual.
WARNING: If the auxiliary outputs are used, selection of fixed or
variable mode must be programmed before connecting the outputs or
potential damage to your system may occur.
CONNECTING THE AUXILIARY OUTPUTS TO A
COMPONENT WITH BALANCED INPUTS
With your 865 Integrated Amplifier’s balanced outputs, cable
distances of more than 50 meters are practical.
When using these outputs for bi-amplification into balanced
inputs and if the external amplifier has the standard 26dB of gain, the
loudspeaker outputs of both the 865 and the external amplifier will be
equal.
GETTING
STARTED
1-6
