42
Alternate Setup Method
Setting your Connection Type to Dynamic/Fixed IP (1483 Bridged)
This connection method bridges your network and ISP’s network together. The
Router can obtain an IP address automatically from your ISP’s DHCP server or
accept a fixed IP address assigned by your ISP.
For Dynamic IP connection:
1. IP Assigned by ISP – Select “Yes” if your ISP instructed you to use a fixed IP.
2. Host Name – Enter a host name.
3. VPI/VCI – Enter your VPI and VCI parameter here. These identifiers are
assigned by your ISP.
4. Encapsulation – Select LLC or VC MUX that your ISP uses.
For Fixed IP connection:
1. IP assigned by ISP – Select “No” if your ISP instructed you to use a fixed IP.
2. IP Address – Enter an IP address assigned by your ISP for the Router’s
WAN interface.
3. Subnet Mask – Enter a subnet mask assigned by your ISP.
4. Default Gateway – Enter a default gateway IP address assigned by your ISP.
5. VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI) parameters here. These identifiers are assigned by your ISP.
6. Encapsulation – Select the LLC or VC MUX your ISP uses.
(1)
(2)
(3)
(4)
(1)
(2)
(3)
(4)
(5)
(6)
