A SERVICE OF

logo

Open as PDF
next previous
75
1
2
3
4
5
6
7
8
9
10
section
Troubleshooting
Problem:
The video quality is bad and/or grainy.
Solution:
•Usethequick-accesstoolbartorefreshthevideoscreen.
•Usethequick-accesstoolbarandselect“Automatedadjust”under“Manual
video adjust”. Refer to page 52.
Problem:
The video performance and/or mouse performance is slow.
Solution:
•Usethequick-accesstoolbartorefreshthevideoscreen.
•Usethequick-accesstoolbarandselect“Automatedadjust”under“Manual
video adjust”. Refer to page 52.
Problem:
I forgot my password. How can I reset the RIPM to factory defaults?
Solution:
•Refertothe“RestoringFactoryDefaults”sectiononpage57.
Problem:
I changed the LAN settings to a static IP address, but I cannot get into the
web interface through the new IP address.
Solution:
•Makesureyouuncheckthe“EnableDHCP”box.
•Checkwhetherthecomputeryouareusingtoaccessthewebinterfacehas
an IP address in the same domain as the new IP address to which you set
your Switch.
•Refreshyourbrowserorclearyourbrowser’scache.