31
Setting Up Audio Hardware
Summary
About Audio
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Audio Wiring Workflow
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Audio Hardware Components
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Understanding Remote vs. Local Control of the Lucid Converter
. . . . . . . . . . . . 32
Audio Wiring
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Configuring the Lucid ADA 88192 Converter
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Audio Keywords in the Software Initialisation Configuration File
. . . . . . . . . . . 36
About Audio
Your application uses the Discreet® Native Audio subsystem. Discreet Native Audio offers 8
audio input and 8 audio output channels. They all use 24-bit audio resolution.
Audio Wiring Workflow
The following procedure provides the general workflow for setting up the audio subsystem of
your Effects or Editing application.
To wire the audio subsystem:
1. Ensure that all of your workstation peripherals and video hardware components are
properly connected. If necessary, refer to Chapter 2, “
Connecting Peripherals,” on page 17
and Chapter 3, “
Setting Up Video Hardware,” on page 23.
2. Verify that you have all the required audio hardware components. See “Audio Hardware
Components” on page 32.
3. Determine whether you want to control the Lucid converter remotely or locally. This affects
the way you wire the audio hardware. See “
Understanding Remote vs. Local Control of the
Lucid Converter” on page 32.
