90
Chapter 10 VCI Manager Operations
This application allows you to pair up the MaxiSys
Display Tablet with the VCI device,
either the J2534 Programming Device or the Bluetooth Diagnostic Interface, and to
check the communication status.
Figure 10-1 Sample VCI Manager Screen
1. Connection Mode – there are two connection modes available for selection. The
connection state is displayed alongside.
Bluetooth Paring – when paired to a Bluetooth device, the connection state
displays as Paired; otherwise it displays as Unpaired.
Wired Network Connection (for J2534 ECU Programming Device only) –
when connected to a Local Area Network, the connection status displays as
Connected; otherwise it displays as Disconnected.
Select a connection mode to manage and set up connection.
2. Settings – this section allows you to manage wireless pairing or set up network
connection.
Bluetooth Setting – searches and displays the type and a partial serial
number for all of the devices available for pairing. Tap a required device to
start pairing. The Bluetooth status icon displayed to the left of the device
name indicates the received signal strength.
Ethernet Setting – allows you to perform network configuration.
