Autel MaxiDAS Manual

A SERVICE OF

next previous

Digital Inspection Operations Additional Accessories

111

Accessory Assembly

For 8.5mm Imager Head

The three accessories, including the Magnet, Hook, and Mirror (Figure 15-2),

can be attached to the Imager Head with the same manner described below:

1. Hold the accessory and the imager head.

2. Slip the end of the accessory over the imager head and then fix the

accessory.

For 5.5mm Imager Head

The two accessories, including the Magnet and Mirror (Figure 15-3), can be

attached to the Imager Head with the same manner described below:

1. Hold the accessory and the imager head.