76
4. LED indicator (4) indicated a full charge.
5. Disconnect the charger.
6. In order to achieve maximum battery life, it is recommended
to use your jumpstart often, so that the capacity of the battery
is protected and its life expectancy will be extended.
6. USING THE 12V DC POWER SOURCE
1. Open the cover of cigarette lighter socket, on the front of the
jumpstart (3)
2. Plug the jack plug of 12v electrical appliances into the
cigarette lighter socket.
Note:
The maximum power of the cigarette lighter is 150W. If the power
of your appliance is more than 150W, the soc
ket output will shut
down automatically, and will recover in 30 seconds.
7. USING THE USB PORT AND LED WORK LIGHT
1. Push the test/USB switch button (12) one time to turn on the
USB (10) outlet. Push again to switch it off. (If the battery is
less than 10V, the USB output will turn off automatically.)
2. Push the light switch button (1) one time to turn on the LED
work light. Push again to turn it off.
8. MAINTENANCE
1. Always inspect the power station before use to ensure the
cables are in perfect condition and the clamps are clean and
free from corrosion
2. Keep
your jumpstart clean by wiping with a dry cloth. DO NOT
use solvents as a cleaning agent.
3. Keep your jumpstart at HIGH or FULL CHARGE status at all
times.
9. PARTS
