Agilent B2200 User’s Guide, Edition 2 1-3
Introduction
Agilent B2200 Series
Agilent B2200 Series
Agilent B2200 series is a switching matrix designed for semiconductor dc
characteristics measurement applications. The Agilent B2200 series has 14 input
ports and four card slots for the switch modules (plug-in cards), and can configure a
12, 24, 36, or 48 outputs switching matrix. The Agilent B2200A/B2201A supports
the following dedicated switch module.
• Agilent B2210A fA Leakage Switch Module
Dedicated for the Agilent B2200A mainframe.
• Agilent B2211A 14ch Low Leakage Switch Module
Dedicated for the Agilent B2201A mainframe.
NOTE Mixed configuration of the switch modules is not supported.
Basic functions of the Agilent B2200 series are listed below.
• SMU inputs (for source monitor units): 8 ports
• AUX inputs (multipurpose inputs): 6 ports
• Outputs: 12, 24, 36, or 48 ports
• Connection setup and status monitor on the front panel
• Status display on the LED matrix display
• Connection setup by the Light pen
• Automatic control through GPIB interface
• Auto ground function
• Self-test, relay function test
• Relay cleaning
