30
Programming Reference
Agilent 81101A SCPI Command Summary
[:STATe]
ON|OFF Switch security on and off
82
:SET
Block data Set/read complete instrument setting
83
:VERSion?
Read SCPI compliance setting
83
:WARNing
[:COUNt]?
Read number of active warnings
83
:STRing?
Read active warnings as concatenated
string
84
:BUFFer?
Read maximum possible length of con-
catenated string
84
:TRIGger
[:SEQuence [1] | :STARt]
(Pulse mode and period source)
:COUNt
<value> Set/read number of triggered periods to
be generated per ARM event
84
:IMPedance
<value> Set/read impedance at CLK-IN
85
:LEVel
<value> Set/read threshold level at CLK-IN
86
:SLOPe
POS|NEG Set/read trigger slope at CLK-IN
86
:SOURce
IMM | INT[1] | INT2 |EXT Set/read trigger source
(IMM | VFO | PLL | CLK-IN)
86
Command Parameter Description
see
page
