![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/9/b2/9b24e1fe-b8a9-4015-9bf0-b19b243cd06e/9b24e1fe-b8a9-4015-9bf0-b19b243cd06e-bg5d.png)
Accessing Storage Devices
6-00025-01 Rev A Library List 2-61
If you receive an error similar to the message shown below it
indicates the ssi daemon did not start:
SCSI-attached Tape Storage
The following table lists the supported SCSI-attached models
for tape media:
Load Tape in SCSI-attached Libraries
For instruction on preparing media for use by AMASS, see
“Prepare Media for SCSI Devices” on page 1-8.
Load media using the volinlet command.
cl_ipc_write: Sending message to socket
60004 failed on “Connection refused”
StorageTek
SCSI-attached for
Tape
Caveats
Timberwolf Series:
• 9710
• 9714
• 9730
• 9738
• 9740
Because the Timberwolf and L Series
libraries have native drive cleaning
capabilities, automated drive
cleaning by AMASS is not applicable.
To schedule drive cleaning, refer to
your StorageTek documentation.
NOTE: These are SCSI-attached
libraries; therefore, AMASS does not
support mixed media.
L Series:
• L180
• L700