Chapter 2 - Configuring HDSL Parameters
26 Campus-REX2 RS Interface Card User Manual
CONFIGURING HDSL ALARMS
You can configure options for four types of alarms:
• HDSL ES Alarm Threshold determines the number of errored seconds
that must occur to trigger an alarm.
• HDSL Margin Alarm Threshold determines the margin, in dB, that
triggers an alarm.
• Alarm on Local I/F LOS lets you enable or disable the local Loss of
Signal alarm.
• Alarm on Remote I/F LOS lets you enable or disable the remote Loss of
Signal alarm.
Access the configuration screen, then set the options.
Accessing HDSL Alarms Configuration
1 From the Main Menu (page 14), type then press to access the
System Settings Menu.
3 ENTER
Jul 07, 2003 ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
Local Unit ID: Local I/F: REX2
Remote Unit ID: Remote I/F: REX2
Circuit ID:
SYSTEM SETTINGS MENU
1) SYSTEM PARAMETERS
2) HDSL PARAMETERS
(R)eturn
ENTER CHOICE>
