New Features 33
New and
Updated MIBs
At version 8.1.1, LANplex MIB support was added for:
■ File transfer of Flash and NVRAM images
■ Enhanced FDDI MAC and port configuration
■ SNMP community string configuration
■ Control panel access lock
■ Remote console session lock
■ Console password configuration
■ Date and time configuration
■ FDDI backplane station mode configuration
At version 8.1.1, support for the Interface MIB (if.mib) was added. This
MIB supports the following objects:
■ ifStackTable
■ ifXTable
■ ifName
■ ifLinkUpDownTrapEnable
At version 8.1.1, support for the ATM MIB (atm.mib) was added.
Removing STP on a
Per Port Basis
Beginning in version 8.1.1, you may remove ports from the Spanning Tree
operation on a per-port basis. Ports removed from Spanning Tree (STP) do
not participate in the STP operation but continue to forward data.
Previously, ports could be enabled or disabled. For more information on
administering STP bridge port parameters, see the
CoreBuilder 2500
Administration Console User Guide
.
Telnet Timeout
Interval Changed
Beginning in version 8.1.1, you can configure the telnet timeout interval
to a number between 1 and 60 minutes. Previously, this interval could
only be configured to a number between 30 and 60 minutes.
