Filter
Top Products
Page 6 For technical questions, please call 1-800-444-3353. Item 90018
Expert Loading Directions
Only for individuals certified by the ASI (ATV Safety Institute)
By using directions in this section, you are agreeing that you are an ASI trained, certied rider
and that you understand that your safety in performing this procedure is
based on your ability to control the vehicle.
1. Have an assistant monitor the Ramp
tongue for slippage on the tailgate.
2. Confirm that the weight of the ATV
and rider combined is still less than
the 1500 lb. capacity of this ramp.
3. While wearing a safety helmet, drive
your ATV onto ramp at less than 1
Mile Per Hour using the lowest gear
possible. Drive up at a slow, steady
speed while leaning forward on the
front pegs to keep proper balance. Try
to avoid bouncing or jerking, because
they will increase stress on the ramp.
WARNING! Be sure the 4-wheeled
ATV is centered on ramp.
4. Once the load is in truck bed,
be sure to set the ATV’s brake &
securely tie down ATV. Remove the
ramp, fold it up and secure it with
the Safety Chains and Hooks.
CAUTION! Contact between the tongue of
the ramp and the tailgate of the vehicle may
result in damage to the vehicle’s body finish.
CAUTION! WHENEVER possible, use
a winch (not included) to load the ATV.
This is the safest way to load an ATV.