Filter
Top Products
LF2020/LF2090 Sit-To-Stand Patient Lift Owner’s Manual 9
1. Position the patient in a sitting position.
2. Slide the sling down patient’s back to
lumbar position.
3. Draw the shoulder straps to the front of the
patient close to the chest.
4. Draw the waist belt around patient’s waist
and press together to fasten.
5. Place shoulder straps inside of positioning
loop.
6. Attach the shoulder straps to the hooks.
OPERATING INSTRUCTIONS
Preparation Before Lifting
1. Turn on the power by twisting the RED RESET
BUTTON clockwise.
2. Press the UP or DOWN button on the hand
control once. Check if the battery indicator
lights are on. To proceed with lifting, make
sure there is at least one green light. Batteries
are fully charged when three (3) green lights
are shown.
3. After the battery indicator lights go out, push
the UP button and the DOWN button on the
hand control and ensure that the lift is
operating correctly.
4. Position of the base of lift around or under
the object.
5. Widen the base.
Fitting Lumex Sit-to-Stand Sling
Warning: The Lumex Sit-to-Stand sling is not suitable for patients who have involuntary
movements, or patients with limited postural control.