Filter
Top Products
6-20
1
2
3
4
5
6
7
8
9
PERIODIC MAINTENANCE AND MINOR REPAIR
items close to the center of the mo-
torcycle, and distribute the weight
evenly from side to side. Properly
adjust the suspension for your load,
and check the condition and pressure
of your tires. NEVER OVERLOAD
YOUR VEHICLE. Make sure that the
total weight of the cargo, rider, pas-
senger, and accessories (cowling,
saddlebags, etc. if approved for this
model) does not exceed the maxi-
mum load of the vehicle. Operation
of an overloaded motorcycle could
cause tire damage, an accident, or
even injury.
Tire inspection
The tires must be checked before each
ride. If a tire tread shows crosswise lines
(minimum tread depth), if the tire has a
nail or glass fragments in it, or if the
sidewall is cracked, have a Yamaha
dealer replace the tire immediately.
Minimum tire tread depth (front and
rear):
0.8 mm (0.03 in)
NOTE:
The tire tread depth limits may differ from
country to country. Always comply with
the local regulations.
Tire information
This scooter is equipped with cast
wheels and tubeless tires with valves.
EWA10590
w
Operating the scooter with exces-
sively worn tires decrease riding sta-
bility and can lead to loss of control.
Have excessively worn tires replaced
by a Yamaha dealer immediately.
Brakes, tires, and related wheel parts
replacement should be left to a
Yamaha Service Technician.
EWA10580
w
88
88
8 It is dangerous to ride with a
worn-out tire. When a tire tread
begins to show crosswise lines,
have a Yamaha dealer replace the
tire immediately.
88
88
8 The replacement of all wheel-
and brake-related parts, includ-
ing the tires, should be left to a
Yamaha dealer, who has the nec-
essary professional knowledge
and experience.
FRONT
Manufacturer Size Model
Cheng shin 3.50-10 51J
REAR
Manufacturer Size Model
Cheng shin 3.50-10 51J
5YR-F8199-11ch6.pmd 2004/06/11, 14:0120