Filter
Top Products
H.264 Motion Estimation Engine www.xilinx.com 15
UG453 (v1.1) April 23, 2008
R
Chapter 2
Installing the H.264 Motion Estimation
Engine Core
This chapter provides instructions for installing the H. 264 Motion Estimation Engine core.
The Motion Estimation Engine fixed netlist is provided under the Xilinx LogiCORE™ Site
License Agreement, which conforms to the terms of the
SignOnce IP Site License standard
defined by the Common License Consortium.
Install the core by performing a manual installation after downloading the core from the
web.
System Requirements
Windows
• Windows® 2000 Professional with Service Pack 2 or greater
• Windows XP Professional Service Pack 2 or greater
Software
• Xilinx ISE™ 9.1i with Service Pack 3
• ModelSim® 6.1c SE
• MicroSoft Visual C++ 6.0
• ActivePerl 5.8.3
Manual Installation
1. Download the IP Update ZIP file from the following location and save it to a
temporary directory:
https://secure.xilinx.com/webreg/register.do?group=h264_me
Prompted to enter a login name and password, enter your Xilinx login name and
password.
2. If you are new to Xilinx, click Create an Account and follow the instructions.
3. Three ZIP files are given. Unzip them all into the same directory. They are as follows
(x_y is the release version number, e.g., 1_0).
a. H264_MotionEstimation_verx_y_utils.zip – unzip this first.
b. H.264_MotionEstimation_verx_y_ReleaseNetlists.zip
c. H264_MotionEstimation_verx_y_InputSequences.zip