Filter
Top Products
into the ear to allow the
probe tip to continuously
scan the ear canal. This
will ensure an accurate
temperature measurement
(See Fig. 4). After one
second release the
POWER/SCAN button
for a temperature reading.
5. A beep will indicate the
end of the temperature
measurement. (See Fig. 5).
Remove thermometer from
ear canal and view the
temperature.
7. A smiling face will
appear in the display to
indicate a temperature
lower than 100.4°F/38°C
INSTRUCTIONS FOR USE
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
4. Keeping the POWER/SCAN button
depressed, insert the probe into the ear
canal. The probe must be inserted well
1. Press and realease the
POWER/SCAN button
and the system will start
its self-testing cycle
(See Fig. 1).
2. Once the self-testing is
completed, the display
will show the last temper-
ature recorded. (See Fig.
2). This indicates that the
thermometer is ready for
you to use.
3. Press the POWER/SCAN
button without releasing
it so it will perform the
automatic scanning
sequences. The word Lo
may appear indicating
the temperature
registering is lower than
93.2°F/34°C (See Fig. 3).
6. To change the reading from Celsius to
Fahrenheit, press the POWER/SCAN
button without releasing it and then
press the MEM button.
Figure 6
6
7