Toshiba SL-9000N-FFB Scale User Manual


 
10-1
10. OUTLINE OF OPERATION
NOTES:
1. You can register a password to prohibit unauthorized access to each menu expect for REG.
menu.
2. To avoid wasteful use of the display, press the POWER key to turn the display off while being
unused. Pressing the POWER key again allows you to enter REG. mode without scanning.
3. Refer to respective sections for explanation each menu enclosed by a double rectangle.
4. In the self service scale mode (the initial setting #13-2 is set to 1) the POWER , and ESC.
keys are available in the following cases.
POWER key: Available after the main power switch turns ON.
ESC. key: Available after the POWER key is depressed while scaling.
5. In the self service scale mode (the initial setting #13-2 is set to 1), these keys are unavailable.
If you would like to switch the initial setting #13-2 to 1, please contact your authorized TOSHIBA TEC
representative.
10. OUTLINE OF OPERATION
EM1-31064
10. OUTLINE OF OPERATION
2
1
1
2
ESC Key
2
Main Menu
Main Power
Switch ON
Display OFF
Scanning Display
Display OFF
Press the
POWER key
Password Input
REG Menu
(Refer to Section 14)
or
Increment
Other than Menu #1.
Unnecessary
Menu
#1
Necessary
Press
Press
No Press
No Press
Menu No. 1
REWRAP Menu
(Refer to Section 14)
Menu No. 3
RESET Menu
(Refer to Section 15)
Menu No. 6
PROG Menu
(Refer to Section 11)
Menu No. 0
MARK DOWN
Menu
(Refer to Section 14)
Menu No. 2
READ Menu
(Refer to Section 12, 15)
Menu No. 5
SECURITY
Menu
(Refer to Section 13)
Menu No. 4
Decrement
NEXT
PLU
Select the
Menu #
Password
POWER key
ESC. key
Return to
each mode
VOID
Press the
POWER key
NOTE5
NOTE5
NOTE4
No Press
Press
WARNING!
Since there is a cutter at the paper outlet, be careful not to injure your fingers when
issuing labels.
<Menu>
0. PROG. 5. REPORT
1. REG 6. RESET
2. MARK DOWN 7.
3. REWRAP 8.
4. SECURITY 9.