Toshiba SL-9000-FFH-US Scale User Manual


 
6. PROCEDURE BEFORE OPERATION
6. PROCEDURE BEFORE OPERATION
6- 1
6. PROCEDURE BEFORE OPERATION
1. Ask an authorized installing dealer for the scale installation. Please contact your nearest
TOSHIBA TEC representative.
2. Hang the platter arm from the scale. (See page 7-1.)
3. Load the label or receipt.
4. Set the following programming menus:
Menu Page ITEM No. Programming Name
2 0 PRINT FORMAT
2 1 DATE/TIME SETTING
1 1 PLU DATA SETTING
If necessary, set the following program menu:
Menu Page ITEM No. Programming Name
1 2 INGREDIENT MESSAGE
1 3 NUTRITION SETTING
1 5 ADDRESS AND COMMECIAL MESSAGE SETTING
1 7 SPECIAL INFORMATION
1 8 GRADE LINE
1 9 SPEED KEY SET
5. Call a PLU which contains the unit price used in weighing mode, then place a weight on the platter
and check a correct price is displayed.
6. Label issued is ready.
NOTE: For details of the programming menus, refer to Section 10.