Filter
Top Products
El-04189
13. LABEL THREADING
14. CLEANING THE PRINT HEAD
If the print
head is dirty, clear printing is not performed. It is recommended to clean the head with thermal
head cleaner everyday, before starting operation by following procedure:
1)
2)
3)
4)
Remove the printer cover and right side
cover.
Push the head hold lever to arrow direc-
tion.
Print Head
Lift the head pusher plate in the direc-
tion of the arrow with your hand, and
hang its pin to 3rd. groove of the head
hold lever in order to allow the print
head to be easily seem.
Wipe off the dirt on the [I portion]
Head
Pusher
Plate
Head Hold
- Lever-
/
--------- ---------
with the thermal head cleaner,
Then push down the print head.
/
/
I
r’
NOTE: DO NOT DAMAGE the print head
when cleaning.
- 50 -