Filter
Top Products
El-04189
8. CASSETTE MAGNETIC TAPE OPERATIONS
The SL59 is designed to interface with a cassette magnetic tape. This tape unit allows the transfer of the
entire PLU file from the SL59 to the tape. This can be accomplished using a number of operation steps. In
turn, information from the tape can also be transferred to other SL59.
1) SAVE (SL59 + CMT)
Control lock:
PRl position
I
Start the tape to be recorded after entire rewinding.
Index 111
I
Confirm the magnetic painted part of tape running the Head.
(Over 5 sec. after Starting.)
Depress: VI key
2) SAVE Comparison
Rewind the tape entirely again.
Start the CMT to play (Not recording).
I
Index 121
I
Depress:
3) Load (CMT + SL59)
Sta;t the CMT to play (Not recording).
Depress:
4) Load Comparison
Same procedures as “SAVE comparison”.
5) Errors
Comparison Error (-4): Warning for being different points after comparison.
Header Error (-2):
Warning for the use of another Spec. Tape.
,
Time Over Error (-3): Warning for being over time (14 seconds) after depressing m]
key in Load and Comparison (Not save operation).
Hard Error (- 1): Warning for the status Error.
NOTE 1: The error mode can be released by depressing a key, and try to operate again according to
the above steps.
2: When SAVE operation (SL59
* CMT) cannot be executed in 4 seconds after depressing
[m] key, it will result in Time over error mode.
-lO-