Toshiba H-9100N Scale User Manual


 
6. PROCEDURE BEFORE OPERATION
6. PROCEDURE BEFORE OPERATION
6- 1
6. PROCEDURE BEFORE OPERATION
1. Unpack the accessories and H-9100N units from the carton.
2. Refer to Safety Precautions in this manual and set up the H-9100N units in proper location.
3. Connect the scale unit to the printer unit.
4. Connect the power cord to the printer unit.
5. Connect the LON cable to the printer unit, if necessary.
6. Load the label or receipt roll.
7. Insert the power cord plug into an AC outlet.
8. Level the printer unit. Refer to Section 7.
9. Connect a PC-AT keyboard, if necessary.
10. Turn the power on and press the power key on the keyboard.
11. Set the following programming menus.
Menu Page ITEM No. Programming Name
2 0 PRINT FORMAT
2 1 DATE/TIME SETTING
1 1 PLU DATA SETTING
If necessary, set the following program menu:
Menu Page ITEM No. Programming Name
1 2 INGREDIENT MESSAGE
1 3 NUTRITION SETTING
1 5 ADDRESS AND COMMERCIAL MESSAGE SETTING
1 7 SPECIAL INFORMATION
1 8 GRADE LINE
1 9 SPEED KEY SET
12. Call a PLU which contains the unit price used in weighing mode, then place a weight on the
platter and check a correct price is displayed.
13. The scale is ready to issue labels.
NOTE: For details of the programming menus, refer to Section 10.
CAUTION:
Be sure to use the provided power cord.