Toshiba EO1-31001 Scale User Manual


 
11. PROGRAMMING PROCEDURES
11.12 DATE/TIME SETTING
11-20
11.12 DATE/TIME SETTING
Menu Page: 2
Item No.: 1
Date, time, machine number, and store code are set with this procedure.
11.13 CMT/PL-3
Menu Page: 2
Item No.: 2
CMT Operations
The SL-9000 is designed to interface with a Cassette Magnetic Tape loader. This loader allows the
transfer of the entire PLU file, ingredient file and other data from the SL-9000 to tapes. This can be
accomplished in number of operation steps.
In turn, information from the tape can also be transferred to another SL-9000 scale.
1
k
<MENU>
Page 2
PROG.
ESC.
<MENU>
Page 2
Main
<MENU>
Set the date.
(Month, Day, Year)
Set the machine No.
(max. 6 dig.)
ENTER
k
ENTER
ENTER ENTER
Set the time.
(Hour, Minute)
Set the store No.
(max. 5 dig.)
NOTES:
1. Express the time in a 24-hour military format.
2. The SL-9000 will check details of date (time) input, and any wrong date (time) will result in
an error mode. Then the correct date (time) should be re-entered and press the
key.
3. Even when initial Set 8-4, 8-5 or 8-6 is set to the Julian Date side, the way to enter the
date in the date setting operation is the same as in the ordinary case.
4. The date display method can be changed by the initial setting.
CLEAR
2
<MENU>
Page 2
PROG.
ESC.
<MENU>
Page 2
Main
<MENU>
Set the transmission items.
(Refer to table 4)
ENTER
NEXT
PLU
or
NOTES:
1. The error mode can be released by pressing the key, and operated again
through the above steps.
2. Use the metal cassette tape which is commercially available and has a capacity of 45 or
60 minutes recording.
3. For operations of the CMT loader, refer to the instruction manual provided with the CMT
loader.
CLEAR