Filter
Top Products
13. OPERATING PROCEDURES
13.4 PRINT COUNT OPERATION
13- 6
13.4 PRINT COUNT OPERATION
With this procedure, a specified number of the same labels can be issued.
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH, FIX or BY-COUNT
Example A) When operating in Weigh mode.
NOTES:
1. A batch issue means to print labels continuously with the backing paper attached. On-demand
issue means to print label one by one.
2. To check the remaining number, clear the PLU and press the key.
Place a commodity
on the platter.
(Ex. 0.700 lb.)
The label is issued with the
backing paper attached.
The label is issued.
When all the specified numbers
of the labels are being issued.
Remove the commodity.
Press :
Set the number of labels.
(Max. 99 labels)
Press :
Enter the PLU #.
Press :
PLU data is saved.
MANUAL :
: AUTO
Batch On-demand
Clear the preset count.
Press :
5 0
PRESET
COUNT
3 0 9 1
PLU
SAVE
C
PRESET COUNT
PRT
*
©
PRT
*
©
PRT
*