Filter
Top Products
7
ENGLISH
TOPCOM BPM Arm 6331
8 Display
9 Applying the cuff
1. Systolic pressure
2. Diastolic pressure
3. Pulse rate
4. Pulse symbol
5. Memory number
6. Error indication
7. Battery Low indicator
8. Blood pressure unit
9. Date
10. Time
1. Remove all watches, jewelry, etc.
prior to attaching the Arm cuff.
2. Press your brachial artery by two
fingers approximately 2,5 cm
above the elbow on the inside of
your left arm to determine where
your strongest pulse is.
3. Slide the end of arm cuff furthest
from the tube through the metal
ring to a loop. The smooth cloth
should be on the inside of the cuff.
The Velcro will be on the outside of
the cuff.
4. Put the left arm through the cuff
loop. The bottom of the cuff should
be approx. 1,5 cm above the elbow.
The cuff should lie over the
brachialartery on the inside of the
arm.
5. Pull the cuff so that the top and
bottom edges are tightened around
your arm.
mmHg
P
ERROR
9
10
1
2
3
4
6
7
8
5